Viking Dishwasher 1-3 Error Code
A Viking dishwasher that logs 1-3 is asking for confirmation against the use & care guide. Simply Iconic can diagnose independently if the code returns.
Content status: Reviewed — wording follows cited Viking service literature; confirm decode on your exact model.
Viking dishwasher flash/E-code summary for independent service — confirm on your model tag.
Viking dishwasher code 1-3 — safe owner checks first, then independent diagnosis if it returns.
Model compatibility: Viking reuses codes across series and model years, so 1-3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Motor control communication error — lost serial communication between the machine control and motor controller. Reset the unit by pressing and holding the START button for four seconds, then try the cycle again. Persistent codes are a booking signal for Simply Iconic; approve any repair only after a written estimate.
Symptoms you may notice
- 1-3 flash pattern
- Cycle aborts early
- May appear at start of wash
Possible causes
- Harness fault between boards
- Failed motor controller
- Failed machine control board
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Reset the unit by pressing and holding the START button for four seconds, then try the cycle again.
- One breaker power cycle for two minutes
- Record when the code first appeared
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
Persistent 1-3 after one careful reset is a technician visit. Simply Iconic serves Viking appliances as an independent repair shop.
Likely related component
Motor controller communication
Frequently asked questions
Motor control communication error — lost serial communication between the machine control and motor controller. Reset the unit by pressing and holding the START button for four seconds, then try the cycle again. Persistent codes are a booking signal for Simply Iconic; approve any repair only after a written estimate.
Safe homeowner resets may clear 1-3 temporarily; sealed, gas, and live-board work stay with a technician.
Not reliably. Two similar Viking displays can map 1-3 differently by series.
Sources & references
Model, symptom, ZIP — we’ll confirm a visit
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Use the secure scheduler below to request your appointment.