Viking Dishwasher 3-3 Error Code
A Viking dishwasher that logs 3-3 is asking for confirmation against the use & care guide. Simply Iconic can diagnose independently if the code returns.
Content status: Reviewed — wording follows cited Viking service literature; confirm decode on your exact model.
Viking dishwasher flash/E-code summary for independent service — confirm on your model tag.
3-3 usually means a sensed fault on this Viking dishwasher. Confirm your manual before buying parts.
Model compatibility: Viking reuses codes across series and model years, so 3-3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Drain pump error — the drain pump did not operate as expected. Reset the unit by pressing and holding the START button for four seconds, then try the cycle again. If safe checks fail, contact Simply Iconic with your model and serial numbers for on-site diagnosis.
Symptoms you may notice
- 3-3 flash pattern
- Water left in tub
- Pump may be silent when draining expected
Possible causes
- Failed drain pump motor
- Debris blocking pump
- Control not energizing pump
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Clean filters and sump area
- Verify drain path clear
- Reset the unit by pressing and holding the START button for four seconds, then try the cycle again.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
When to call a technician
For recurring 3-3, independent service is safer than guessing parts. Simply Iconic will diagnose on site and estimate before any repair.
Likely related component
Drain pump
Frequently asked questions
Drain pump error — the drain pump did not operate as expected. Reset the unit by pressing and holding the START button for four seconds, then try the cycle again. If safe checks fail, contact Simply Iconic with your model and serial numbers for on-site diagnosis.
Clearing the display is not the same as fixing the cause. If 3-3 comes back, schedule diagnosis.
Platform families overlap, but Simply Iconic still confirms 3-3 against your serial family.
Sources & references
Model, symptom, ZIP — we’ll confirm a visit
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Use the secure scheduler below to request your appointment.