Viking Oven F07 Error Code
F07 indicates a door switch or interlock fault on the oven.
Content status: Reviewed — wording follows cited Viking service literature; confirm decode on your exact model.
F07 door interlock fault; relates to LATCH ERROR text message.
F07 indicates a door switch or interlock fault on the oven.
Model compatibility: Viking reuses codes across series and model years, so F07 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F07 is commonly documented as a door switch or interlock fault — the control does not see the expected door/latch state. Related to LATCH ERROR on text-display controls. Do not force the door; disconnect power and call independent service if it persists. Viking uses multiple electronic oven control (EOC) generations; the same display can decode differently by model year. Record your model and serial numbers and confirm against your appliance documentation.
Symptoms you may notice
- F07 displayed
- Door appears closed but oven will not start
- May occur with self-clean or lock functions
Possible causes
- Misaligned door or striker
- Failed door switch or interlock
- Latch and switch out of sync
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Confirm the door closes fully without force
- Allow cooling after self-clean
- Disconnect power and call service if F07 returns
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
Schedule independent service if F07 persists — door interlock faults affect safe operation.
Likely related component
Door switch / interlock
Frequently asked questions
Yes — both indicate the control cannot confirm a safe door/latch state.
Sources & references
Model, symptom, ZIP — we’ll confirm a visit
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Use the secure scheduler below to request your appointment.