Viking Oven F04 Error Code
F04 indicates a meat probe circuit fault — commonly a shorted probe or contaminated jack.
Content status: Reviewed — wording follows cited Viking service literature; confirm decode on your exact model.
F04 aligns with Viking Error Handling PROBE ERROR.
F04 indicates a meat probe circuit fault — commonly a shorted probe or contaminated jack.
Model compatibility: Viking reuses codes across series and model years, so F04 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F04 is commonly documented as a meat probe circuit shorted condition. This corresponds to the PROBE ERROR text message in Viking Error Handling (probe open or shorted). Remove the probe, press OFF, and call service if the code remains with the probe inserted. Viking uses multiple electronic oven control (EOC) generations; the same display can decode differently by model year. Record your model and serial numbers and confirm against your appliance documentation.
Symptoms you may notice
- F04 with probe inserted or after roast mode
- Probe jack may have moisture or debris
- Roast/probe modes disabled
Possible causes
- Moisture in the probe jack
- Damaged probe cable or connector
- Probe shorted internally
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Remove the meat probe
- Press OFF to clear per manual
- Allow the jack to dry; call service if F04 appears without a probe
Important safety warning. Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not adjust, disconnect or repair any gas connection or valve
When to call a technician
If F04 persists without a probe inserted, contact an independent Viking technician.
Likely related component
Meat probe and probe jack
Frequently asked questions
Yes — text vs numeric display for the same probe circuit fault class.
Sources & references
Model, symptom, ZIP — we’ll confirm a visit
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Use the secure scheduler below to request your appointment.